Big Block V8 502 Crate Engine - GM (19433156)
Big Block V8 502 Crate Engine - GM (19433156)
- GM
- 19433156
- 12371054, 88890534
Details
- Brand:
- SKU:
19433156
- Description:
A BIG-INCH ALTERNATIVE TO REBUILDING
Don't bother repowering your trusty Big-Block-powered truck with a rebuild or reconditioned used engine. Our HT502 crate engine is an affordable alternative with more power and greater durability, including a whopping 541 lb.-ft. of trailer-tugging torque. That's more than the factory ever offered and more than you'll get with a stock-type rebuild.
It is uniquely suited to pre-1978 trucks, but is adaptable to a variety of applications, and it's built with our latestgeneration block casting with four-bolt main caps. An all-forged rotating assembly delivers exceptional strength and durability, while a mild 8.75:1 compression ratio is suitable for regular pump gasoline at all altitudes and engine loads.
Our assembly comes with the heads and a balancer installed. An induction system, ignition, starter, water pump and other accessories are required to finish the engine. All necessary components are available from Chevrolet Performance.
TECH SPECS
Part Number: 88890534
Engine Type: Chevy Big-Block V-8
Displacement (cu in): 502
Bore x Stroke (in): 4.47 x 4.00
Block (P/N 19170540): Cast-iron with 4-bolt main caps
Crankshaft (P/N 10183723): Forged steel
Connecting Rods (P/N 19170198): Forged steel, shot peened
Pistons (P/N 12533507): Forged aluminum
Camshaft Type (P/N 12552296): Hydraulic roller
Camshaft Lift (in): .480 intake / .483 exhaust
Camshaft Duration (@.050 in): 204° intake / 209° exhaust
Cylinder Heads (P/N 12562917): Iron oval port; 118cc chambers
Valve Size (in): 2.07 intake / 1.73 exhaust
Compression Ratio: 8.75:1
Rocker Arms (P/N 19260993): Stamped steel
Rocker Arm Ratio: 1.7:1
Flexplate (P/N 10185034): 14"
Recommended Fuel: Regular pump
Ignition Timing: 34° Total at 4,000 rpm
Maximum Recommended rpm: 5,500
Balanced: External
INSTALLATION NOTES- Requires the addition of carburetor, intake manifold, water pump, fuel pump, starter, distributor and ignition system (not included)
- Clutch linkage bosses are now drilled and tapped. When using cast-iron exhaust manifolds, lower head bolts may need to be replaced with bolts with shorter heads, for clearance
- 502 engines now have a mechanical fuel pump boss! NOTE: There is NO fuel pump lobe behind the boss.
- Comes with an externally balanced 14" automatic transmission flexplate. Use externally balanced flywheel P/N 14096987 and 11" clutch assembly for manual transmission applications
- Designed for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
- Replaces:
12371054, 88890534
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov - MSRP: $12,012.71
- Discount: $2,462.61 (20.5% off)
- Sale Price: $9,550.10
- GM
- 19433156
- 12371054, 88890534
Details
- Brand:
- SKU:
19433156
- Description:
A BIG-INCH ALTERNATIVE TO REBUILDING
Don't bother repowering your trusty Big-Block-powered truck with a rebuild or reconditioned used engine. Our HT502 crate engine is an affordable alternative with more power and greater durability, including a whopping 541 lb.-ft. of trailer-tugging torque. That's more than the factory ever offered and more than you'll get with a stock-type rebuild.
It is uniquely suited to pre-1978 trucks, but is adaptable to a variety of applications, and it's built with our latestgeneration block casting with four-bolt main caps. An all-forged rotating assembly delivers exceptional strength and durability, while a mild 8.75:1 compression ratio is suitable for regular pump gasoline at all altitudes and engine loads.
Our assembly comes with the heads and a balancer installed. An induction system, ignition, starter, water pump and other accessories are required to finish the engine. All necessary components are available from Chevrolet Performance.
TECH SPECS
Part Number: 88890534
Engine Type: Chevy Big-Block V-8
Displacement (cu in): 502
Bore x Stroke (in): 4.47 x 4.00
Block (P/N 19170540): Cast-iron with 4-bolt main caps
Crankshaft (P/N 10183723): Forged steel
Connecting Rods (P/N 19170198): Forged steel, shot peened
Pistons (P/N 12533507): Forged aluminum
Camshaft Type (P/N 12552296): Hydraulic roller
Camshaft Lift (in): .480 intake / .483 exhaust
Camshaft Duration (@.050 in): 204° intake / 209° exhaust
Cylinder Heads (P/N 12562917): Iron oval port; 118cc chambers
Valve Size (in): 2.07 intake / 1.73 exhaust
Compression Ratio: 8.75:1
Rocker Arms (P/N 19260993): Stamped steel
Rocker Arm Ratio: 1.7:1
Flexplate (P/N 10185034): 14"
Recommended Fuel: Regular pump
Ignition Timing: 34° Total at 4,000 rpm
Maximum Recommended rpm: 5,500
Balanced: External
INSTALLATION NOTES- Requires the addition of carburetor, intake manifold, water pump, fuel pump, starter, distributor and ignition system (not included)
- Clutch linkage bosses are now drilled and tapped. When using cast-iron exhaust manifolds, lower head bolts may need to be replaced with bolts with shorter heads, for clearance
- 502 engines now have a mechanical fuel pump boss! NOTE: There is NO fuel pump lobe behind the boss.
- Comes with an externally balanced 14" automatic transmission flexplate. Use externally balanced flywheel P/N 14096987 and 11" clutch assembly for manual transmission applications
- Designed for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
- Replaces:
12371054, 88890534
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Big Block V8 502 Crate Engine - GM (19433156)
Also Purchased
Vehicle Fitment
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Details
- Brand:
- SKU:
19433156
- Description:
A BIG-INCH ALTERNATIVE TO REBUILDING
Don't bother repowering your trusty Big-Block-powered truck with a rebuild or reconditioned used engine. Our HT502 crate engine is an affordable alternative with more power and greater durability, including a whopping 541 lb.-ft. of trailer-tugging torque. That's more than the factory ever offered and more than you'll get with a stock-type rebuild.
It is uniquely suited to pre-1978 trucks, but is adaptable to a variety of applications, and it's built with our latestgeneration block casting with four-bolt main caps. An all-forged rotating assembly delivers exceptional strength and durability, while a mild 8.75:1 compression ratio is suitable for regular pump gasoline at all altitudes and engine loads.
Our assembly comes with the heads and a balancer installed. An induction system, ignition, starter, water pump and other accessories are required to finish the engine. All necessary components are available from Chevrolet Performance.
TECH SPECS
Part Number: 88890534
Engine Type: Chevy Big-Block V-8
Displacement (cu in): 502
Bore x Stroke (in): 4.47 x 4.00
Block (P/N 19170540): Cast-iron with 4-bolt main caps
Crankshaft (P/N 10183723): Forged steel
Connecting Rods (P/N 19170198): Forged steel, shot peened
Pistons (P/N 12533507): Forged aluminum
Camshaft Type (P/N 12552296): Hydraulic roller
Camshaft Lift (in): .480 intake / .483 exhaust
Camshaft Duration (@.050 in): 204° intake / 209° exhaust
Cylinder Heads (P/N 12562917): Iron oval port; 118cc chambers
Valve Size (in): 2.07 intake / 1.73 exhaust
Compression Ratio: 8.75:1
Rocker Arms (P/N 19260993): Stamped steel
Rocker Arm Ratio: 1.7:1
Flexplate (P/N 10185034): 14"
Recommended Fuel: Regular pump
Ignition Timing: 34° Total at 4,000 rpm
Maximum Recommended rpm: 5,500
Balanced: External
INSTALLATION NOTES- Requires the addition of carburetor, intake manifold, water pump, fuel pump, starter, distributor and ignition system (not included)
- Clutch linkage bosses are now drilled and tapped. When using cast-iron exhaust manifolds, lower head bolts may need to be replaced with bolts with shorter heads, for clearance
- 502 engines now have a mechanical fuel pump boss! NOTE: There is NO fuel pump lobe behind the boss.
- Comes with an externally balanced 14" automatic transmission flexplate. Use externally balanced flywheel P/N 14096987 and 11" clutch assembly for manual transmission applications
- Designed for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
- Replaces:
12371054, 88890534
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov GMPartsOutlet.net
GMPartsOutlet.net offers below wholesale pricing on Genuine GM Parts with fast shipping direct to your door.
GM
When repairing your GM vehicle, why trust your auto parts to anyone other than the manufacturer that built the vehicle in the first place? All of our products are Genuine OEM GM parts. From Chevrolet and GMC to Cadillac and Buick, a car is only as good as the parts that it's made of and you won't get the same quality with aftermarket parts.
Please note:
*Prices on this website are for online purchases only and will not be honored at the dealership parts counter. All orders must ship. Customer pickup is not available.
*Most of the illustrations contained in this online parts catalog are just simple renditions of the part and where it may be located on the vehicle, it is for reference only.
*There are many factors such as trim, color, and options that will not be shown in the illustrations. GM Body Parts do not come already painted.
*We provide free parts fitment verification when you include your vehicle's VIN at checkout.
*LH and/or LEFT is the Driver side of your vehicle. RH and/or RIGHT is the Passenger side. "Paint to Match" , "Painted" and "Paintable" means you will need to have the item painted to match your vehicle once you receive it.
*This third party GM catalog is for reference only and is sometimes contains incorrect information, quantity pack errors, illustration or pictures. GM parts and never sold in pack quantities even if shown in photo on the website and price is per single piece.
*Parts ordered without providing a VIN are non returnable. Electrical Items are non returnable
*This website does not reflect our current on hand inventory