ENGINE - GM (19421178)
ENGINE - GM (19421178)
- GM
- 19421178
Details
- Brand:
- SKU:
19421178
- Description:
OUR BEST CRATE ENGINE VALUE DELIVERS ALL YOU EXPECT IN A POWERFUL SMALL-BLOCK!
The most affordable Cheverolet Performance Small-Block crate engine is also our best seller - and it's easy to understand why. The 350/290 Base Small-BIock features four-bolt mains for strength and makes a great economical alternative to rebuilding a tired, two-bolt main core. Use it to re-power your daily driver or drop it in your budget Camaro project!
Inside the 350/290 Base are quality parts, including a camshaft and durable aluminum pistons that squeeze an 8.5:1 compression ratio. We offer the 350/290 in a base form, allowing you to add the induction and other accessories. That's great for builders swapping over the intake manifold, carburetor and other components when re-powering a vehicle.
Chevrolet Performance has all the components to build up the 350/290 Base into a high-performance, great-looking street engine, too - from an aluminum intake and carburetor (we recommend the 670-cfm Holley four-barrel, P/N 19170092) to the distributor, water pump and more. Save the time and hassle of rebuilding your old engine by ordering the 350/290 Base and finishing it to your own specifications.
TECH SPECS
Part Number: 12499529 / 19355658
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block (P/N 10066034): Cast-iron with 4-bolt main caps
Crankshaft (P/N 93426651): Nodular iron
Connecting Rods (P/N 10108688): Powdered metal steel
Pistons (P/N 93422884): Cast-aluminum
Camshaft Type (P/N 3896962): Hydraulic flat tappet
Camshaft Lift (in): .450 intake /.460 exhaust
Camshaft Duration (@.050 in): 222° intake / 222° exhaust
Cylinder Heads (P/N 93438649): Iron; 76cc chambers
Valve Size (in): 1.94 intake / 1.50 exhaust
Compression Ratio: 8.0:1
Rocker Arms (P/N 10089648): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Regular pump
Ignition Timing: 34° Total @ 4,000 rpm
Maximum Recommended rpm: 5,100
Balanced: Internal
INSTALLATION NOTES- Use neutral balance harmonic damper P/N 12551537
- Use internally balanced flexplate P/N 471529 for automatic transmission or flywheel P/N 14085720 for manual transmission(not included)
- Power ratings based on tests with Holley 670-cfm carburetor P/N 19170092 (not included)
- Does not accept Chevrolet Performance roller lifter assemblies
- Designed for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
- See the Valve Covers section for selection of chrome, polished and aluminum valve covers
- Pre-1986-style 2-piece rear main seal block
- Recommended for use in vehicles with 6,000 GVW or less
- Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov - GM
- 19421178
Details
- Brand:
- SKU:
19421178
- Description:
OUR BEST CRATE ENGINE VALUE DELIVERS ALL YOU EXPECT IN A POWERFUL SMALL-BLOCK!
The most affordable Cheverolet Performance Small-Block crate engine is also our best seller - and it's easy to understand why. The 350/290 Base Small-BIock features four-bolt mains for strength and makes a great economical alternative to rebuilding a tired, two-bolt main core. Use it to re-power your daily driver or drop it in your budget Camaro project!
Inside the 350/290 Base are quality parts, including a camshaft and durable aluminum pistons that squeeze an 8.5:1 compression ratio. We offer the 350/290 in a base form, allowing you to add the induction and other accessories. That's great for builders swapping over the intake manifold, carburetor and other components when re-powering a vehicle.
Chevrolet Performance has all the components to build up the 350/290 Base into a high-performance, great-looking street engine, too - from an aluminum intake and carburetor (we recommend the 670-cfm Holley four-barrel, P/N 19170092) to the distributor, water pump and more. Save the time and hassle of rebuilding your old engine by ordering the 350/290 Base and finishing it to your own specifications.
TECH SPECS
Part Number: 12499529 / 19355658
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block (P/N 10066034): Cast-iron with 4-bolt main caps
Crankshaft (P/N 93426651): Nodular iron
Connecting Rods (P/N 10108688): Powdered metal steel
Pistons (P/N 93422884): Cast-aluminum
Camshaft Type (P/N 3896962): Hydraulic flat tappet
Camshaft Lift (in): .450 intake /.460 exhaust
Camshaft Duration (@.050 in): 222° intake / 222° exhaust
Cylinder Heads (P/N 93438649): Iron; 76cc chambers
Valve Size (in): 1.94 intake / 1.50 exhaust
Compression Ratio: 8.0:1
Rocker Arms (P/N 10089648): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Regular pump
Ignition Timing: 34° Total @ 4,000 rpm
Maximum Recommended rpm: 5,100
Balanced: Internal
INSTALLATION NOTES- Use neutral balance harmonic damper P/N 12551537
- Use internally balanced flexplate P/N 471529 for automatic transmission or flywheel P/N 14085720 for manual transmission(not included)
- Power ratings based on tests with Holley 670-cfm carburetor P/N 19170092 (not included)
- Does not accept Chevrolet Performance roller lifter assemblies
- Designed for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
- See the Valve Covers section for selection of chrome, polished and aluminum valve covers
- Pre-1986-style 2-piece rear main seal block
- Recommended for use in vehicles with 6,000 GVW or less
- Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov ENGINE - GM (19421178)
Also Purchased
Vehicle Fitment
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Details
- Brand:
- SKU:
19421178
- Description:
OUR BEST CRATE ENGINE VALUE DELIVERS ALL YOU EXPECT IN A POWERFUL SMALL-BLOCK!
The most affordable Cheverolet Performance Small-Block crate engine is also our best seller - and it's easy to understand why. The 350/290 Base Small-BIock features four-bolt mains for strength and makes a great economical alternative to rebuilding a tired, two-bolt main core. Use it to re-power your daily driver or drop it in your budget Camaro project!
Inside the 350/290 Base are quality parts, including a camshaft and durable aluminum pistons that squeeze an 8.5:1 compression ratio. We offer the 350/290 in a base form, allowing you to add the induction and other accessories. That's great for builders swapping over the intake manifold, carburetor and other components when re-powering a vehicle.
Chevrolet Performance has all the components to build up the 350/290 Base into a high-performance, great-looking street engine, too - from an aluminum intake and carburetor (we recommend the 670-cfm Holley four-barrel, P/N 19170092) to the distributor, water pump and more. Save the time and hassle of rebuilding your old engine by ordering the 350/290 Base and finishing it to your own specifications.
TECH SPECS
Part Number: 12499529 / 19355658
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block (P/N 10066034): Cast-iron with 4-bolt main caps
Crankshaft (P/N 93426651): Nodular iron
Connecting Rods (P/N 10108688): Powdered metal steel
Pistons (P/N 93422884): Cast-aluminum
Camshaft Type (P/N 3896962): Hydraulic flat tappet
Camshaft Lift (in): .450 intake /.460 exhaust
Camshaft Duration (@.050 in): 222° intake / 222° exhaust
Cylinder Heads (P/N 93438649): Iron; 76cc chambers
Valve Size (in): 1.94 intake / 1.50 exhaust
Compression Ratio: 8.0:1
Rocker Arms (P/N 10089648): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Regular pump
Ignition Timing: 34° Total @ 4,000 rpm
Maximum Recommended rpm: 5,100
Balanced: Internal
INSTALLATION NOTES- Use neutral balance harmonic damper P/N 12551537
- Use internally balanced flexplate P/N 471529 for automatic transmission or flywheel P/N 14085720 for manual transmission(not included)
- Power ratings based on tests with Holley 670-cfm carburetor P/N 19170092 (not included)
- Does not accept Chevrolet Performance roller lifter assemblies
- Designed for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
- See the Valve Covers section for selection of chrome, polished and aluminum valve covers
- Pre-1986-style 2-piece rear main seal block
- Recommended for use in vehicles with 6,000 GVW or less
- Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov GMPartsOutlet.net
GMPartsOutlet.net offers below wholesale pricing on Genuine GM Parts with fast shipping direct to your door.
GM
When repairing your GM vehicle, why trust your auto parts to anyone other than the manufacturer that built the vehicle in the first place? All of our products are Genuine OEM GM parts. From Chevrolet and GMC to Cadillac and Buick, a car is only as good as the parts that it's made of and you won't get the same quality with aftermarket parts.
Please note:
*Prices on this website are for online purchases only and will not be honored at the dealership parts counter. All orders must ship. Customer pickup is not available.
*Most of the illustrations contained in this online parts catalog are just simple renditions of the part and where it may be located on the vehicle, it is for reference only.
*There are many factors such as trim, color, and options that will not be shown in the illustrations. GM Body Parts do not come already painted.
*We provide free parts fitment verification when you include your vehicle's VIN at checkout.
*LH and/or LEFT is the Driver side of your vehicle. RH and/or RIGHT is the Passenger side. "Paint to Match" , "Painted" and "Paintable" means you will need to have the item painted to match your vehicle once you receive it.
*This third party GM catalog is for reference only and is sometimes contains incorrect information, quantity pack errors, illustration or pictures. GM parts and never sold in pack quantities even if shown in photo on the website and price is per single piece.
*Parts ordered without providing a VIN are non returnable. Electrical Items are non returnable
*This website does not reflect our current on hand inventory