Engine - GM (19433041)
Engine - GM (19433041)
- GM
- 19433041
- 19351532, 19355668, 19417576, 19419205, 19432104
Details
- Brand:
- SKU:
19433041
- Description:
CHEVROLET PERFORMANCE'S ICONIC 350-BASED "ZZ" ENGINE FAMILY CONTINUES THE LEGACY
Chevrolet Performance's new ZZ6 delivers more power than any 350 Small-Block ever installed in a production vehicle. Rated at 405 hp and 406 lb.-ft. of torque, it derives its range-topping performance from unique, lightweight aluminum cylinder heads that enable optimal airflow at high rpm.
The cylinder head casting is based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. Beehive-style valve springs deliver greater high-rpm performance and durability. Their egg-shaped profiles have less reciprocating mass in motion, require less spring pressure for greater valve control and handle valvetrain stresses more efficiently. They allow the ZZ6 to rev higher to make the most of every cubic inch of air drawn through it.
The ZZ6 also uses an aggressive hydraulic roller camshaft that supports the engine's high-rpm airflow capability while maintaining excellent low-speed drivability. This Base crate engine kit includes the intake manifold, distributor, water pump, damper and flexplate - and the distinctive, racing-inspired valve covers that distinguish this crate engine as the latest in the ZZ legacy!
TECH SPECS
Part Number: 19351532
Engine Type: Chevy Small-Block
Displacement (cu in): 350
Bore x Stroke (in.): 4.000 x 3.48
Block (P/N 10243870): Cast-iron with 4-bolt Mains
Crankshaft (P/N 12670965): Forged steel (shot peened)
Connecting Rods (P/N 10108688): Forged powder metal
Pistons (P/N 10159436): Hypereutectic aluminum
Intake Manifold (P/N 12496822): Single-plane aluminum
Carburetor (P/N 19170093): 770 cfm Holley
Camshaft (P/N 10185071): Steel hydraulic roller
Valve Lift (in): .474 intake/.510 exhaust
Camshaft Duration (@.050 in): 208° intake/221° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (inches): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.72:1 nominal
Rocker Arms (P/N 19210724): Aluminum roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Distributor (P/N 93440806): HEI
Ignition timing: 36? Total @ 4,000 rpm
Maximum Recommended RPM: 5,800 rpm
Flexplate (P/N 14088765): 12.750"
Balanced: External
INSTALLATION NOTES- Requires four-barrel carburetor, spark plug wires and additional components to complete assembly
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Requires fuel line from fuel pump to carburetor
- Designed for pre-1976 street vehicles or any off-road vehicle
- Some assembly and minor engine tuning required
- Not intended for marine applications
- Replaces:
19351532, 19355668, 19417576, 19419205, 19432104
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov - MSRP: $11,878.36
- Discount: $2,435.06 (20.5% off)
- Sale Price: $9,443.30
- GM
- 19433041
- 19351532, 19355668, 19417576, 19419205, 19432104
Details
- Brand:
- SKU:
19433041
- Description:
CHEVROLET PERFORMANCE'S ICONIC 350-BASED "ZZ" ENGINE FAMILY CONTINUES THE LEGACY
Chevrolet Performance's new ZZ6 delivers more power than any 350 Small-Block ever installed in a production vehicle. Rated at 405 hp and 406 lb.-ft. of torque, it derives its range-topping performance from unique, lightweight aluminum cylinder heads that enable optimal airflow at high rpm.
The cylinder head casting is based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. Beehive-style valve springs deliver greater high-rpm performance and durability. Their egg-shaped profiles have less reciprocating mass in motion, require less spring pressure for greater valve control and handle valvetrain stresses more efficiently. They allow the ZZ6 to rev higher to make the most of every cubic inch of air drawn through it.
The ZZ6 also uses an aggressive hydraulic roller camshaft that supports the engine's high-rpm airflow capability while maintaining excellent low-speed drivability. This Base crate engine kit includes the intake manifold, distributor, water pump, damper and flexplate - and the distinctive, racing-inspired valve covers that distinguish this crate engine as the latest in the ZZ legacy!
TECH SPECS
Part Number: 19351532
Engine Type: Chevy Small-Block
Displacement (cu in): 350
Bore x Stroke (in.): 4.000 x 3.48
Block (P/N 10243870): Cast-iron with 4-bolt Mains
Crankshaft (P/N 12670965): Forged steel (shot peened)
Connecting Rods (P/N 10108688): Forged powder metal
Pistons (P/N 10159436): Hypereutectic aluminum
Intake Manifold (P/N 12496822): Single-plane aluminum
Carburetor (P/N 19170093): 770 cfm Holley
Camshaft (P/N 10185071): Steel hydraulic roller
Valve Lift (in): .474 intake/.510 exhaust
Camshaft Duration (@.050 in): 208° intake/221° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (inches): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.72:1 nominal
Rocker Arms (P/N 19210724): Aluminum roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Distributor (P/N 93440806): HEI
Ignition timing: 36? Total @ 4,000 rpm
Maximum Recommended RPM: 5,800 rpm
Flexplate (P/N 14088765): 12.750"
Balanced: External
INSTALLATION NOTES- Requires four-barrel carburetor, spark plug wires and additional components to complete assembly
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Requires fuel line from fuel pump to carburetor
- Designed for pre-1976 street vehicles or any off-road vehicle
- Some assembly and minor engine tuning required
- Not intended for marine applications
- Replaces:
19351532, 19355668, 19417576, 19419205, 19432104
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Engine - GM (19433041)
Also Purchased
Vehicle Fitment
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Details
- Brand:
- SKU:
19433041
- Description:
CHEVROLET PERFORMANCE'S ICONIC 350-BASED "ZZ" ENGINE FAMILY CONTINUES THE LEGACY
Chevrolet Performance's new ZZ6 delivers more power than any 350 Small-Block ever installed in a production vehicle. Rated at 405 hp and 406 lb.-ft. of torque, it derives its range-topping performance from unique, lightweight aluminum cylinder heads that enable optimal airflow at high rpm.
The cylinder head casting is based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. Beehive-style valve springs deliver greater high-rpm performance and durability. Their egg-shaped profiles have less reciprocating mass in motion, require less spring pressure for greater valve control and handle valvetrain stresses more efficiently. They allow the ZZ6 to rev higher to make the most of every cubic inch of air drawn through it.
The ZZ6 also uses an aggressive hydraulic roller camshaft that supports the engine's high-rpm airflow capability while maintaining excellent low-speed drivability. This Base crate engine kit includes the intake manifold, distributor, water pump, damper and flexplate - and the distinctive, racing-inspired valve covers that distinguish this crate engine as the latest in the ZZ legacy!
TECH SPECS
Part Number: 19351532
Engine Type: Chevy Small-Block
Displacement (cu in): 350
Bore x Stroke (in.): 4.000 x 3.48
Block (P/N 10243870): Cast-iron with 4-bolt Mains
Crankshaft (P/N 12670965): Forged steel (shot peened)
Connecting Rods (P/N 10108688): Forged powder metal
Pistons (P/N 10159436): Hypereutectic aluminum
Intake Manifold (P/N 12496822): Single-plane aluminum
Carburetor (P/N 19170093): 770 cfm Holley
Camshaft (P/N 10185071): Steel hydraulic roller
Valve Lift (in): .474 intake/.510 exhaust
Camshaft Duration (@.050 in): 208° intake/221° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (inches): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.72:1 nominal
Rocker Arms (P/N 19210724): Aluminum roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Distributor (P/N 93440806): HEI
Ignition timing: 36? Total @ 4,000 rpm
Maximum Recommended RPM: 5,800 rpm
Flexplate (P/N 14088765): 12.750"
Balanced: External
INSTALLATION NOTES- Requires four-barrel carburetor, spark plug wires and additional components to complete assembly
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Requires fuel line from fuel pump to carburetor
- Designed for pre-1976 street vehicles or any off-road vehicle
- Some assembly and minor engine tuning required
- Not intended for marine applications
- Replaces:
19351532, 19355668, 19417576, 19419205, 19432104
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov GMPartsOutlet.net
GMPartsOutlet.net offers below wholesale pricing on Genuine GM Parts with fast shipping direct to your door.
GM
When repairing your GM vehicle, why trust your auto parts to anyone other than the manufacturer that built the vehicle in the first place? All of our products are Genuine OEM GM parts. From Chevrolet and GMC to Cadillac and Buick, a car is only as good as the parts that it's made of and you won't get the same quality with aftermarket parts.
Please note:
*Prices on this website are for online purchases only and will not be honored at the dealership parts counter. All orders must ship. Customer pickup is not available.
*Most of the illustrations contained in this online parts catalog are just simple renditions of the part and where it may be located on the vehicle, it is for reference only.
*There are many factors such as trim, color, and options that will not be shown in the illustrations. GM Body Parts do not come already painted.
*We provide free parts fitment verification when you include your vehicle's VIN at checkout.
*LH and/or LEFT is the Driver side of your vehicle. RH and/or RIGHT is the Passenger side. "Paint to Match" , "Painted" and "Paintable" means you will need to have the item painted to match your vehicle once you receive it.
*This third party GM catalog is for reference only and is sometimes contains incorrect information, quantity pack errors, illustration or pictures. GM parts and never sold in pack quantities even if shown in photo on the website and price is per single piece.
*Parts ordered without providing a VIN are non returnable. Electrical Items are non returnable
*This website does not reflect our current on hand inventory